Author: Shantha · Last updated: 3 October 2026
Choose UPS batteries in Sri Lanka by matching the exact UPS model, voltage, battery chemistry, dimensions and runtime requirements.
UPS batteries in Sri Lanka: How do I choose a replacement battery for my UPS?
Choose a UPS battery by matching the exact UPS model, battery voltage, chemistry, dimensions and connector, then check the battery capacity and the runtime you need. Do not select by amp-hour rating alone: the UPS must support the battery arrangement and charging requirements.
For more information, see the linked published guide. Confirm current models, pricing, stock and warranty with Richcom before ordering.
How do I check battery compatibility?
Read the UPS label and manual for the required battery voltage, number of batteries, chemistry, dimensions and connector. Match those details to the replacement and ask the supplier to confirm compatibility for the exact UPS model.
What battery capacity do I need?
Capacity affects potential runtime, but actual backup time depends on the UPS, connected load, battery condition and installation. Use the UPS maker’s runtime data and obtain a load-specific estimate if you need a defined duration.
When should a UPS battery be replaced?
Replace a battery when the UPS reports a fault, runtime falls noticeably, or the manufacturer’s service guidance calls for replacement. Arrange safe installation and recycling through a qualified supplier.
For advice based on your exact model and requirements, contact Richcom Technology or email [email protected].
Frequently asked questions
Only if the UPS manufacturer supports that battery capacity and type. Confirm the voltage, chemistry, charging limits and physical fit for the exact model.
Battery life varies with chemistry, temperature, charging and discharge history. Follow the manufacturer’s maintenance guidance and monitor actual runtime.
Follow the UPS manufacturer’s instructions. If the battery is internal, the unit is under warranty or you are unsure, use a qualified service provider.
Use the manufacturer’s runtime chart at the measured load. Battery capacity alone does not determine runtime.
