Specifications
| Model | POS-1002 |
|---|---|
| Product type | Fast Ethernet PoE splitter |
| PoE input | IEEE 802.3af |
| Ethernet data rate | 10/100 Mbps |
| DC output | Selectable 5 V, 9 V or 12 V |
| Connectors | PoE input RJ45, data output RJ45 and DC output |
| DC tips | Four interchangeable tips described by manufacturer |
| Indicators | DC power (green) |
| Power consumption | Less than 3 W |
| Dimensions | 55 × 80 × 31 mm |
| Product weight | 0.076 kg |
| Operating temperature | 0 °C to 45 °C |
| Operating humidity | 5% to 95% RH |
| Package contents | POS-1002 and quick installation guide listed in specifications; manufacturer description mentions four DC tips |
Key Features
- Run a compatible non-PoE Fast Ethernet device from an existing PoE cable.
- Select 5 V, 9 V or 12 V DC to match the connected equipment.
- Separate 10/100 Mbps data from the power feed at the device location.
- Use interchangeable DC tips for several compatible connector sizes.
- Reduce the need for an electrical outlet near a remote camera or access point.
Product Information
The Level One POS-1002 separates an IEEE 802.3af PoE feed into 10/100 Mbps Ethernet data and selectable DC output for a device that cannot accept PoE directly. Set the voltage and choose a matching DC tip only after checking the equipment’s voltage, connector polarity and power requirements. It is suited to compatible network cameras, wireless equipment and similar Fast Ethernet hardware. An upstream PoE source is required. The manufacturer lists the splitter and quick installation guide in the package specification and describes four interchangeable DC tips; confirm the supplied tips against the actual stock carton.
Reviews
There are no reviews yet.