Specifications
| Brand headquarters / origin | PLANET / Taiwan |
|---|---|
| Model | IGS-1020TF |
| Copper Ports | 8 × 10/100/1000BASE-T RJ45; auto-MDI/MDI-X and auto-negotiation (manual v1.2) |
| SFP/mini-GBIC Slots | 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10) Compatible with 100BASE-FX SFP |
| Switch Processing Scheme | Store-and-Forward |
| Switch Fabric | 20Gbps (non-blocking) |
| Switch Throughput (packet per second) | 14.88Mpps@64bytes |
| MAC Address Table | 4K entries |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Jumbo Frame | 9216 bytes |
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
| Alarm | Provides one relay output for power failure Alarm Relay current carry ability: 1A @ DC 24V |
| LED Indicator | 3 x LED for System and Power : Green: DC Power 1 Green: DC Power 2 Red: Power Fault 2 x LED for Per Copper Port (Port-1~Port-8) : Green: 1000 LNK/ACT Orange:100 LNK/ACT 2 x LED for Per Mini-GBIC Interface (Port-9 and Port-10) : Green: 1000 LNK/ACT Orange:100 LNK/ACT |
| ESD Protection | 6KV DC |
| Enclosure | IP30 type metal case |
| Installation | DIN rail kit and wall-mount ear |
| Weight | 540g |
| Power Requirements | DC 12~48V or AC 24V Redundant power with polarity reverses protection function |
| Power Consumption/Dissipation | 8.7 watts/29.69BTU |
| Cable | Twisted-pair ■ 10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters ■ 100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters ■ 1000BASE-T: 4-pair UTP Cat. 5e, 6 up to 100 meters Fiber-Optic Cable ■ 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m ■ 1000BASE-LX: 9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (vary on SFP module) ■ 100BASE-FX: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2 kilometers 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (vary on SFP module) |
| Standards Compliance | IEEE 802.3 Ethernet/10BASE-T IEEE 802.3u Fast Ethernet/100BASE-TX IEEE 802.3ab Gigabit Ethernet/1000BASE-T IEEE 802.3z Gigabit Ethernet/1000BASE-SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.1p Cos |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (anti-shock) IEC 60068-2-6 (anti-vibration) |
| Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity | Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing) |
| Management | Unmanaged |
| PoE | No PoE output |
| Included | Switch, manual, DIN-rail bracket and screws, wall-mount plate and screws, eight RJ45 dust caps and two SFP dust caps |
| Optional | SFP modules and suitable external power supply |
| Store warranty | 3 YEARS WARRANTY |
Key Features
- Aggregate eight copper links with two fiber uplinks.
- Select compatible 100Mbps or Gigabit optics for the installation.
- Use redundant inputs and a power-failure relay for cabinet monitoring.
- Support larger Ethernet frames up to 9216 bytes.
- Mount on a DIN rail or wall in an industrial enclosure.
Product Information
IGS-1020TF provides eight copper ports and two SFP uplinks for industrial Ethernet distribution. The version 1.2 manual confirms 10/100/1000Mbps copper support and 100/1000Mbps fiber-module compatibility. It is unmanaged and does not require a browser or command-line configuration for basic forwarding.
Supply the unit from supported 12–48V DC or 24V AC power and choose compatible optical modules separately. The power-failure relay can be wired into an appropriate alarm circuit. This non-PoE switch carries data only on its Ethernet ports. Chassis dimensions are omitted because the official manual and web table contain conflicting measurements.
Complete your network connections
Match cable performance to the installation and check the exact switch interfaces before choosing accessories.



Reviews
There are no reviews yet.