Specifications
| Brand headquarters / origin | PLANET / Taiwan |
|---|---|
| Model | ISW-511 |
| Copper | Ports 4 x 10/100Base-TX, auto negotiation, auto-MDI/MDI-X Cable 10Base-T : 2-pair UTP Cat. 3, 4, 5cable (100meters, max.) 100Base-TX : 2-pair UTP Cat. 5cable (100meters, max.) |
| Optical | 1 × 100BASE-FX multimode SC; 50/125μm fiber; 2km; 1310nm; transmit −19 to −14dBm; receive sensitivity −34.5dBm; maximum input −14dBm |
| Dimensions (W x D x H) | 135 x 87.8 x 32 mm |
| Weight | 436g |
| Power Requirements | 12~48 VDC, Redundant power with polarity reverse protection function |
| Power Consumption / Dissipation | 9.1 watts / 31BTU |
| Installation | DIN rail kit and wall mount ear |
| Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V |
| Switch Processing Scheme | Store-and-Forward |
| Address Table | 2K entries |
| Buffer | 1Mbit |
| Flow Control | Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
| Switch Fabric | 1Gbps |
| Throughput | 0.74Mpps @ 64Bytes |
| Standards Compliance | IEEE 802.3 Ethernet, 10Base-T IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX IEEE 802.3x Full-duplex flow control |
| Temperature | Operating: -10~60 degrees C Storage: -40~85 degrees C |
| Humidity | Operating: 5~90%, Storage: 5~90% (non-condensing) |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Safety | UL, cUL |
| Stability Testing | IEC60068-2-32(Free fall), IEC60068-2-27(Shock), IEC60068-2-6(Vibration) |
| Included | Switch, manual, DIN-rail bracket and screws, wall-mount plate and screws, four RJ45 dust caps |
| Optional | Suitable external DC supply and optical cable |
| Management | Unmanaged |
| PoE | No PoE output |
| Store warranty | 3 YEARS WARRANTY |
Key Features
- Connect four copper Fast Ethernet devices to multimode fiber.
- Reach up to 2km over compatible 50/125μm optical cabling.
- Use redundant DC inputs for supply continuity.
- Monitor power failure with a relay contact.
- Install using the supplied DIN-rail or wall-mount hardware.
Product Information
ISW-511 is an unmanaged industrial Fast Ethernet switch with fixed multimode SC optics. Its 1 fiber port operate at 100Mbps with 1310nm optics over a documented distance of up to 2km. The optical interface is fixed; it is not an interchangeable SFP slot.
This listing covers the exact ISW-511 variant. Its multimode interface and −10–60°C operating range must be distinguished from the S15 single-mode and T temperature variants. Provide 12–48V DC power, and match fiber type, connector and the remote optical interface. The switch has no PoE output and uses up to 9.1W as documented.
Reviews
There are no reviews yet.