Specifications
| Brand headquarters / origin | Edimax / Taiwan |
|---|---|
| Model | AR-7286WnA |
| Interface | 1 x RJ-11 WAN-port 4 x RJ-45 Fast Ethernet LAN ports |
| Button | 1 x Reset button for factory default settings 1 x WPS button 1 x WLAN button 1 x Power on/off button |
| LED Indicator | Power, ADSL, LAN 1-4, Internet, WPS |
| Antenna | 2 x 5dBi external antenna |
| Memory | 2MB NOR Flash 8MB SDRAM |
| Power Adapter | 12V DC, 0.5A |
| Dimension | 135 x 118 x 28 mm |
| Weight | 187g |
| Standards | 802.11 b/g/n |
| Frequency & Modulation | 2.4GHz (2400–2483 MHz ISM band) 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM, 16QAM, QPSK, BPSK, DSSS 802.11n: 64QAM, 16QAM, QPSK, BPSK |
| Maximum Data Speed | 2.4GHz: up to 300Mbps |
| Output Power | 2.4GHz: – 11b: 16±1.5dBm – 11g: 15±1.5dBm – 11n: 14±1.5dBm |
| ADSL Features | ANSI T1.413i2 ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite) ITU G.992.3 ADSL2 (G.dmt.bis), ITU G.992.4 (G.lite.bis) ITU G.992.5 (G.dmt.bisplus), ITU G.994.1 (G.hs) ITU G.995.1, ITU G.996.1, ITU G.997.1 Power saving mode, L3 to L0 initialization Supports multiple PVCs Supports traffic shaping (ATM QoS) UBR, CBR, VBR-rt, VBR-nrt Supports OAM F4/F5 loop-back, AIS, and RDI OAM cells UNI 3.1/4.0 permanent virtual circuits |
| Wireless Features | Compatible with IEEE 802.11b,IEEE 802.11g and IEEE 802.11n Supports auto channeling 2T2R mode with 300Mbps PHY rate for both transmitting and receiving Legacy and high throughput modes 20MHz/40MHz Bandwidth Supports 64/128-bit WEP, 802.1x, WPA and WPA2 wireless security Multiple BSSID support Wireless frequency range: 2400–2483 MHz ISM band |
| Routing Features | Routing (TCP/ IP/ UDP/ ARP/ ICMP) 802.1D MAC Bridge RIP v1 (RFC1058), RIP v2 (RFC1723) IGMP Snooping (V1/ V2/ V3) IGMP Proxy (V1/ V2 ) VLSM (RFC1878) RFC 1877 PPP IPCP Extensions for Name Server Address RFC 1877 PPP IPCP Extensions for Name Server Address (limited to DNS addresses unless the device supports NetBIOS) RFC 0791 IP Fragmentation IETF RFC 0919, IETF RFC 0922, IETF RFC 2644 IP Broadcast |
| Security | Management access control for LAN/WAN sides Prevent port scanning, denial-of-service (DOS) and LAND attacks Stateful packet inspection (SPI) IP spoofing, IP with zero length IP/MAC filtering, application filtering, URL filter |
| Certification | CE |
| Management | Web configuration, TR-069, UPnP, SNTP and firmware upgrade support |
| Environment | Operating Temperature: 0℃~40℃ (32℉ ~104℉) Storage Temperature: -40℃~70℃ (-4℉ ~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing |
| Package Contents | 1 x ADSL2+ router 1 x 1M Ethernet cable 2 x 1.8M RJ-11 Cable 1 x Splitter 2 x 5dBi antenna 1 x Power Adapter Quick Installation Guide CD with multi-language QIG and user manual |
Key Features
- Combine an ADSL modem, router and wired switch in one unit.
- Connect four local devices through Fast Ethernet LAN ports.
- Provide 2.4GHz wireless access to compatible clients.
- Separate wireless network names using multiple SSIDs.
- Configure the connection through the supported web setup interface.
Product Information
AR-7286WnA combines an ADSL2/ADSL2+ modem, router and four-port Fast Ethernet switch with an N300 wireless radio. It is intended for a compatible DSL service rather than a fiber optical connection. The two external 5dBi antennas support the documented radio configuration; actual throughput depends on the DSL line, wireless conditions and client equipment.
The supplied model suffix is retained. Because the official family table combines A and B annex information, the exact telephone-line annex must be checked against the unit and provider before installation. The device requires 12V DC at 0.5A. The manufacturer documents web configuration and TR-069 management; enabling provider management depends on the network’s configuration.
Reviews
There are no reviews yet.