Specifications
| Brand / origin | Level One / Germany |
|---|---|
| Model | VDS-0200 |
| Documented hardware revision | 1 |
| Ethernet ports | 2 × 10/100BASE-T RJ45; auto MDI-X and half/full duplex |
| DSL interface | 1 × RJ11; ITU-T G.993.1/2, Annex A for PSTN |
| Telephone interface | 1 × RJ11 |
| DSL performance | Up to 100Mbps downstream / 60Mbps upstream over 300 m |
| Maximum line reach | Up to 2 km over a single copper pair; rate decreases with distance |
| Line coding | Trellis code with 1024 DMT bins |
| Configuration | 4 DIP switches; fast/interleaved mode; fixed data rate or SNR margin |
| Power input | 5V DC; datasheet lists 1A/2A adapter configurations |
| Dimensions (L × W × H) | 120 × 90 × 28 mm |
| Operating environment | 0–50°C; 5–95% RH, non-condensing |
| Included | VDSL2 converter, power adapter, user manual, telephone line |
| Store warranty | 3 YEARS WARRANTY |
| Net product weight | 0.55 kg |
Key Features
- Reuse an existing telephone pair to extend an Ethernet link.
- Provide two Fast Ethernet LAN connections.
- Support up to 100/60Mbps over a suitable 300 m line.
- Adjust line behavior using four DIP switches.
- Use the supplied adapter and telephone line for installation.
Product Information
VDS-0200 extends Ethernet over existing copper telephone wiring using VDSL2 Annex A. It can suit buildings where pulling new Ethernet cable is impractical. A compatible unit or service is required at the far end; the advertised maximum rate and longest reach are different operating points and are not simultaneous guarantees. Configure the line settings for the installation and use the matching supplied power adapter.
Reviews
There are no reviews yet.